Are your Leak Detection services available in Williston?

Yes, Masters Plumbing Service provides round-the-clock Leak Detection services directly in Williston, ND.

How much does emergency service cost in Williston?

We offer upfront, transparent pricing with no hidden fees for all service calls in Williston.

🔍 Non-Invasive Detection Technology

Stop Guessing Where the Leak Is — Call Masters Plumbing Service in Williston, ND

Name: Masters Plumbing Service
Telephone: +1-855-718-1500
Price range: $$
Rating: 4.9

A water bill that jumped 30% with no change in usage. A ceiling stain that keeps reappearing after patches. A soft spot in the flooring with no visible source. These are signs of a hidden leak that's been running long enough to cause structural damage — and every day it runs is money lost and damage accumulating. Masters Plumbing Service uses acoustic ground microphones, thermal imaging cameras, and precision pressure testing in Williston, ND to locate leaks without speculative demolition.

📞 Call +1-855-718-1500 — Find Your Leak Today

Acoustic Ground Microphones Thermal Infrared Cameras Pressure Decay Testing Slab & Wall Leak Specialists

Licensed Leak Detection service in Williston, ND - Masters Plumbing Service

Our Detection Methods

4 Detection Capabilities We Bring to Every Leak Detection Call

A pressure test tells us a leak exists and how much water is escaping. Detection equipment tells us precisely where.

🎙️

Acoustic Ground Microphone

Acoustic detection is most effective on metal pipe (copper, cast iron) under slab or in concrete — materials that conduct sound efficiently. It works in quiet environments and requires shutting off the house briefly to establish a clean acoustic baseline.

🌡️

Infrared Thermal Camera

Active water leaks — hot or cold — create a temperature differential on the surfaces they contact. An infrared camera shows these differentials as color-coded heat maps, revealing the wet zone inside a wall or under a floor without any cutting. A cold water leak behind drywall appears as a spreading blue-gray cool zone; a hot water leak shows the inverse.

📉

Pressure Decay Testing

Pressure decay testing is the standard by which we confirm a leak is present before committing detection equipment time. It also tells us approximately how significant the leak is — a rapid pressure drop vs. a slow one indicates the size of the escape point.

💨

Tracer Gas Detection

For leaks that don't produce sufficient acoustic signature — very slow leaks, polyethylene pipe, or leaks deep under concrete — we can introduce a nitrogen/hydrogen tracer gas mixture into the isolated pipe and use a calibrated gas detector at the surface to find where the gas escapes. The detection sensitivity can locate leaks that produce no discernible pressure drop during a standard timed test.

What We Locate

Leak Detection for Walls, Slabs, Pools & Irrigation in Williston

Hidden leaks occur in different locations throughout a property — each requiring a slightly different detection approach. Here's how we handle the most common scenarios in Williston, ND.

Under Slab

Slab Leak Detection

Supply lines run under or through the concrete slab in most slab-on-grade homes. When these lines fail — from corrosion, shifting, or manufacturing defects — the leak is invisible from the surface but audible to acoustic equipment. We walk the floor on a grid pattern, map the loudest detection points, and triangulate to a specific floor location, typically within a square foot.

In-Wall

In-Wall & Ceiling Leak Detection

We document the thermal anomaly, mark the approximate pipe location, and recommend a minimal access cut rather than a wide wall opening.

Water Main

Underground Supply Line Detection

We mark the ground above the detected leak location so the repair crew opens only the section they need to.

Pool & Irrigation

Pool Line & Irrigation Leak Detection

Pool plumbing — suction and return lines buried between the equipment pad and the pool shell — can develop leaks at fittings or in the pipe body that appear as unexplained water loss. We pressure-test the pool plumbing circuit, isolate the return and suction lines separately, and use acoustic detection to find which line and where.

Commercial

Commercial Property Leak Detection

Multi-story buildings, commercial kitchens, retail spaces, and industrial properties have complex pipe networks where a supply or drain leak can go undetected through multiple floors before surfacing. We approach commercial detection systematically — zone by zone pressure isolation, thermal scan of suspect surfaces, and acoustic confirmation.

Documentation

Leak Detection Report for Insurance

Insurance claims for water damage from hidden leaks typically require documentation that the leak was not visible or detectable without specialized equipment. Our detection report includes: pressure test results confirming active water loss, detection method used, thermal imagery or acoustic mapping showing leak location, and technician certification information.

📞 Call +1-855-718-1500 — Locate Your Leak

Our Process

From Water Bill Spike to Confirmed Leak Location — 4 Steps

Here's exactly how a Masters Plumbing Service leak detection call plays out.

Initial Water Loss Confirmation

This step confirms we're looking for a real leak rather than meter error or a normal appliance cycling.

Zone Isolation & Pressure Decay

We isolate the supply system into zones — hot side, cold side, and if possible, individual branches — and pressure-test each zone to determine which branch is losing water. This narrows the area of active search significantly before detection equipment is deployed.

Detection Equipment Deployment

We document findings with thermal images and note detection readings at multiple grid points to triangulate the strongest signal.

Written Report & Repair Options

You receive a written detection report including pressure test results, detection method summary, leak location (described relative to fixed reference points), and thermal imagery. If you want us to repair the leak, we quote the repair and execute immediately. If you have your own plumber, the report gives them everything they need.

Customer Reviews

Williston, ND Homeowners Who Found Their Leak with Masters Plumbing Service

★★★★★

High-efficiency home with a leak that defied normal detection. Water loss was slow — about 1.5 gallons per hour. The tech used tracer gas after pressure testing confirmed the loss but acoustic detection couldn't localize it clearly. Gas detection found the escape at a micro-fitting under the slab in the utility corridor. Impressive work.

— C. Thornton, Williston

★★★★★

Our insurance company required professional leak detection documentation before approving the claim. Masters Plumbing Service's written report with pressure test data and thermal imagery was exactly what the adjuster needed. Claim approved. The detection cost was covered as part of the claim.

— B. Osei, Williston, ND

★★★★★

Commercial building where water costs were running 40% above baseline for six months. Masters Plumbing Service ran a systematic zone-by-zone pressure isolation across four floors, narrowed the loss to the third-floor kitchen supply branch, and located the failure with thermal imaging at a concealed valve body in the ceiling. No damage to the finished ceiling.

— T. Anand, Williston, ND

Trusted Leak Detection service in Williston, ND - Masters Plumbing Service

Common Questions

FAQ — What to Know Before Booking Detection

The most reliable self-check: shut off every fixture and appliance in the house, then watch the water meter for 15 minutes. Any movement — including the small leak indicator dial — means water is escaping the supply side somewhere. If the main meter dial moves with everything off, you have a leak. Call us to locate it.

In most cases, yes — the detection phase is entirely non-invasive. We locate the leak using acoustic, thermal, and pressure methods without any demolition. The detection tells us exactly where to open, which means the access opening is minimal rather than speculative.

For pressurized supply lines in concrete or metal pipe, acoustic detection is typically accurate to within 6–18 inches under ideal conditions — quiet environment, no interference from other water use, metal pipe conducting sound clearly. Thermal imaging is accurate to the size of the wet zone it reveals, which varies based on how long the leak has been running and how far moisture has migrated.

We can provide supplemental information to claims adjusters on request, including equipment calibration records and a technical description of the detection methodology used.

A standard residential leak detection — confirming water loss, isolating the failing zone, and deploying detection equipment to locate the failure — typically takes 1.5–2.5 hours. More complex scenarios (multi-zone commercial, large properties, very slow leaks requiring tracer gas) can run 3–4 hours.

The repair quote is given before any wall or floor is opened. You know the full cost of detection + repair before anything is cut.

Stop Guessing Where the Leak Is — Call Masters Plumbing Service in Williston, ND